Re: [vox] Making custom circuit boards

[Ryan <ryan@motherMAPS.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wednesday, February 06 2002 04:28 pm, Mark K. Kim wrote:
> There are a couple options depending on how professional you want it, what
> the dimensions need to be, etc.  I usually just get a solder-on board and
> solder stuff on, which is usually good for most tasks.  You can get blank
> boards from Radio Shack or HSC in Sacramento (http://www.halted.com/).

I tried one of these, it got really messy, perhaps if I changed my method I 
could get it to work. There are large distances between compoents most of 
which need to share a lot of wires, which makes things a bit annoying without 
a PCB.

> If you want it professionally done, there are several places where you can
> send schematics and they'll do 'em for you.  They can get expensive,
> however.

Yeah, I looked in to that too, the cheapest ones cost $20

> Yet another option is to figure out what you went wrong when you tried to
> make the PCB yourself.
>
> -Mark
> > _______________________________________________
> > vox mailing list
> > vox@lists.lugod.org
> > http://lists.lugod.org/mailman/listinfo/vox

- -- 
No Microsoft products were used in any way for the creation of this message.
PGP Public key at http://mother.com/~ryan/ryan_at_mother_dot_com.asc
It is also on the servers: Key ID 0x72177BC7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE8YdPAEd9E83IXe8cRAglAAJ0WD2sfVctrjsxPeav2kvmydO8GLACdFL7J
+xZfuO0V9Yh6yZztjNWXX/Q=
=EyZl
-----END PGP SIGNATURE-----
_______________________________________________
vox mailing list
vox@lists.lugod.org
http://lists.lugod.org/mailman/listinfo/vox