l i n u x - u s e r s - g r o u p - o f - d a v i s
L U G O D
 
Next Meeting:
November 4: Social gathering
Next Installfest:
TBD
Latest News:
Oct. 24: LUGOD election season has begun!
Page last updated:
2004 Nov 14 19:00

The following is an archive of a post made to our 'vox-tech mailing list' by one of its subscribers.

Report this post as spam:

(Enter your email address)
Re: [vox-tech] uhci memory problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [vox-tech] uhci memory problem



I don't know.  Sorry. -_-'

-Mark


On Sun, 14 Nov 2004, Nick Schmalenberger wrote:

> > Hmm... I donno.  Can you post `lspci -vv` output and can you check your
> > BIOS to see if that memory region is occupied or reserved?  You might
> > also
> > wanna try disabling the sound card from your BIOS and see if that does
> > anything.  Oh, and look up your motherboard model & usb issues on
> > google...  Otherwise I'm out of ideas!! =(
> There aren't any options in my BIOS about io ports in that range, just
> for the serial and parallel ports that are much lower. I am also pretty
> certain that the conflict is not with my sound card because the usb
> controller is initialized well before the sound card. About searching
> for my motherboard and usb on google, most of the people seem to be
> having IRQ conflicts, not i/o port. I guess that is just because IRQ
> conflicts are more common in general. I will append my lspci -vv output.
> Maybe you or somebody on this list will see something in it I don't know
> about.
> Nick
> 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
> bridge (rev 03)
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> 	Latency: 64
> 	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> 	Capabilities: [a0] AGP version 1.0
> 		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
> 		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
> 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
> bridge (rev 03) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 128
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> 	Memory behind bridge: fe400000-febfffff
> 	Prefetchable memory behind bridge: f6000000-f6ffffff
> 	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
>
> 0000:00:02.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
>
> 0000:00:02.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> (prog-if 80 [Master])
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 64
> 	Region 4: I/O ports at fc90 [size=16]
>
> 0000:00:02.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev
> 01) (prog-if 00 [UHCI])
> 	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Interrupt: pin D routed to IRQ 11
> 	Region 4: I/O ports at fca0 [size=32]
>
> 0000:00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
> 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Interrupt: pin ? routed to IRQ 9
>
> 0000:00:03.0 CardBus bridge: Texas Instruments PCI1251A (rev 01)
> 	Subsystem: IBM: Unknown device 0138
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 168, Cache Line Size: 0x08 (32 bytes)
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
> 	Memory window 0: 10400000-107ff000 (prefetchable)
> 	Memory window 1: 10800000-10bff000
> 	I/O window 0: 00004000-000040ff
> 	I/O window 1: 00004400-000044ff
> 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
> 	16-bit legacy interface ports at 0001
>
> 0000:00:03.1 CardBus bridge: Texas Instruments PCI1251A (rev 01)
> 	Subsystem: IBM: Unknown device 0138
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 168, Cache Line Size: 0x08 (32 bytes)
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
> 	Memory window 0: 10c00000-10fff000 (prefetchable)
> 	Memory window 1: 11000000-113ff000
> 	I/O window 0: 00004800-000048ff
> 	I/O window 1: 00004c00-00004cff
> 	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> 	16-bit legacy interface ports at 0001
>
> 0000:00:06.0 Communication controller: Lucent Microelectronics WinModem
> 56k (rev 01)
> 	Subsystem: CIS Technology Inc Lucent Win Modem
> 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at fedffc00 (32-bit, non-prefetchable) [size=256]
> 	Region 1: I/O ports at fc88 [size=8]
> 	Region 2: I/O ports at f800 [size=256]
> 	Capabilities: [f8] Power Management version 2
> 		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.0 Multimedia audio controller: ESS Technology ES1969 Solo-1
> Audiodrive (rev 02)
> 	Subsystem: ESS Technology: Unknown device 8898
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 64 (500ns min, 6000ns max)
> 	Interrupt: pin A routed to IRQ 5
> 	Region 0: I/O ports at fcc0 [size=64]
> 	Region 1: I/O ports at fc60 [size=16]
> 	Region 2: I/O ports at fc70 [size=16]
> 	Region 3: I/O ports at fc58 [size=4]
> 	Region 4: I/O ports at fc5c [size=4]
> 	Capabilities: [c0] Power Management version 1
> 		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2200
> [MagicGraph 256AV] (rev 12) (prog-if 00 [VGA])
> 	Subsystem: IBM: Unknown device 0137
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 128 (4000ns min, 63750ns max)
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at f6000000 (32-bit, prefetchable) [size=16M]
> 	Region 1: Memory at fe400000 (32-bit, non-prefetchable) [size=4M]
> 	Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=1M]
> 	Capabilities: [dc] Power Management version 1
> 		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 	Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8138
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 64 (8000ns min, 16000ns max)
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: I/O ports at 4000 [size=256]
> 	Region 1: Memory at 10800000 (32-bit, non-prefetchable) [size=512]
> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> _______________________________________________
> vox-tech mailing list
> vox-tech@lists.lugod.org
> http://lists.lugod.org/mailman/listinfo/vox-tech
>

-- 
Mark K. Kim
AIM: markus kimius
Homepage: http://www.cbreak.org/
Xanga: http://www.xanga.com/vindaci
Friendster: http://www.friendster.com/user.php?uid=13046
PGP key fingerprint: 7324 BACA 53AD E504 A76E  5167 6822 94F0 F298 5DCE
PGP key available on the homepage
_______________________________________________
vox-tech mailing list
vox-tech@lists.lugod.org
http://lists.lugod.org/mailman/listinfo/vox-tech



LinkedIn
LUGOD Group on LinkedIn
Sign up for LUGOD event announcements
Your email address:
facebook
LUGOD Group on Facebook
'Like' LUGOD on Facebook:

Hosting provided by:
Sunset Systems
Sunset Systems offers preconfigured Linux systems, remote system administration and custom software development.

LUGOD: Linux Users' Group of Davis
PO Box 2082, Davis, CA 95617
Contact Us

LUGOD is a 501(c)7 non-profit organization
based in Davis, California
and serving the Sacramento area.
"Linux" is a trademark of Linus Torvalds.

Sponsored in part by:
EDGE Tech Corp.
For donating some give-aways for our meetings.