l i n u x - u s e r s - g r o u p - o f - d a v i s
L U G O D
 
Next Meeting:
September 2: Social gathering
Next Installfest:
TBD
Latest News:
Aug. 18: Discounts to "Velocity" in NY; come to tonight's "Photography" talk
Page last updated:
2002 May 17 13:55

The following is an archive of a post made to our 'vox-tech mailing list' by one of its subscribers.

Report this post as spam:

(Enter your email address)
Re: [vox-tech] CD-burn attempts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [vox-tech] CD-burn attempts



Can you get access to `xcdroast` on the campus machine?  It's a lot easier
to work with, and IIRC has "erase CD-RW" option to clear the junk data
first.

-Mark (prefers the path of least resistance...)

On Fri, 17 May 2002, Alexandra Thorn wrote:

>
> I've been trying to get some files onto a CD-RW, to bring them to my home
> computer from campus.  So far, no success.  It seems to do better in dummy
> mode than when I try to do the actual burn.  Trying to erase the disk
> doesn't seem to work at all, even in dummy mode.  I'm a newbie, and this
> is my first effort to burn a CD of any kind on any system, so I might be
> missing something that should be obvious.  Below is what gets printed out
> when I try to burn in 1) dummy mode, 2) for real, and 3) blanking in dummy
> mode.  (I've also tried blanking with the -force option.  That doesn't
> work either, but is not included below.)
>
> Thanks in advance,
> Alex
>
> #dummy mode:
> [root@ars164 grassstuff]# cdrecord -v -dummy speed=2 dev=0,0,0 -data
> grass5_cd_image
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.20
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'LG      '
> Identifikation : 'CD-RW CED-8080B '
> Revision       : '1.04'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1024000 = 1000 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data   33 MB
> Total size:      38 MB (03:47.22) = 17042 sectors
> Lout start:      38 MB (03:49/17) = 17042 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 3
>   Reference speed: 6
>   Is not unrestricted
>   Is erasable
>   Disk sub type: High speed Rewritable (CAV) media (1)
>   ATIP start of lead in:  -11625 (97:27/00)
>   ATIP start of lead out: 333750 (74:12/00)
>   speed low: 4 speed high: 8
>   power mult factor: 1 5
>   recommended erase/write power: 5
>   A2 values: 00 00 00
> Disk type:    Phase change
> Manuf. index: 0
> Manufacturer: Illegal Manufacturer code
> Blocks total: 333750 Blocks current: 333750 Blocks remaining: 316708
> RBlocks total: 336246 RBlocks current: 336246 RBlocks remaining: 319204
> Starting to write CD/DVD at speed 2 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 0
> Track 01:  33 of  33 MB written (fifo 100%).
> Track 01: Total bytes read/written: 34897920/34897920 (17040 sectors).
> Writing  time:  116.980s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:  128.505s
> cdrecord: fifo had 550 puts and 550 gets.
> cdrecord: fifo was 0 times empty and 473 times full, min fill was 92%.
>
>
> #regular mode:
> [root@ars164 grassstuff]# cdrecord -v speed=2 dev=0,0,0 -data
> grass5_cd_image
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.20
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'LG      '
> Identifikation : 'CD-RW CED-8080B '
> Revision       : '1.04'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1024000 = 1000 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data   33 MB
> Total size:      38 MB (03:47.22) = 17042 sectors
> Lout start:      38 MB (03:49/17) = 17042 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 3
>   Reference speed: 6
>   Is not unrestricted
>   Is erasable
>   Disk sub type: High speed Rewritable (CAV) media (1)
>   ATIP start of lead in:  -11625 (97:27/00)
>   ATIP start of lead out: 333750 (74:12/00)
>   speed low: 4 speed high: 8
>   power mult factor: 1 5
>   recommended erase/write power: 5
>   A2 values: 00 00 00
> Disk type:    Phase change
> Manuf. index: 0
> Manufacturer: Illegal Manufacturer code
> Trying to clear drive status.
> Blocks total: 333750 Blocks current: 333750 Blocks remaining: 316708
> RBlocks total: 336246 RBlocks current: 336246 RBlocks remaining: 319204
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Starting new track at sector: 0
> Track 01:   0 of  33 MB written.cdrecord: Input/output error. write_g1:
> scsi sendcmd: no error
> CDB:  2A 00 00 00 00 00 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 6.010s timeout 40s
>
> write track data: error after 0 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> Writing  time:   11.031s
> Fixating...
> cdrecord: Input/output error. close track/session: scsi sendcmd: no error
> CDB:  5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 480s
> cmd finished after 0.000s timeout 480s
> Fixating time:    0.001s
> cdrecord: fifo had 64 puts and 1 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
>
> #dummy mode with blank=all option:
> [root@ars164 grassstuff]# cdrecord -v -dummy blank=all speed=2 dev=0,0,0
> -data grass5_cd_image
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.20
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'LG      '
> Identifikation : 'CD-RW CED-8080B '
> Revision       : '1.04'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1024000 = 1000 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data   33 MB
> Total size:      38 MB (03:47.22) = 17042 sectors
> Lout start:      38 MB (03:49/17) = 17042 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 3
>   Reference speed: 6
>   Is not unrestricted
>   Is erasable
>   Disk sub type: High speed Rewritable (CAV) media (1)
>   ATIP start of lead in:  -11625 (97:27/00)
>   ATIP start of lead out: 333750 (74:12/00)
>   speed low: 4 speed high: 8
>   power mult factor: 1 5
>   recommended erase/write power: 5
>   A2 values: 00 00 00
> Disk type:    Phase change
> Manuf. index: 0
> Manufacturer: Illegal Manufacturer code
> Trying to clear drive status.
> cdrecord: Drive needs to reload the media to return to proper status.
> Blocks total: 333750 Blocks current: 333750 Blocks remaining: 316708
> RBlocks total: 336246 RBlocks current: 336246 RBlocks remaining: 319204
> Starting to write CD/DVD at speed 2 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Blanking entire disk
> cdrecord: faio_wait_on_buffer for writer timed out.
> cdrecord: Input/output error. blank unit: scsi sendcmd: no error
> CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 363.090s timeout 9600s
> cdrecord: Cannot blank disk, aborting.
> cdrecord: fifo had 64 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
> _______________________________________________
> vox-tech mailing list
> vox-tech@lists.lugod.org
> http://lists.lugod.org/mailman/listinfo/vox-tech
>

--
Mark K. Kim
http://www.cbreak.org/
PGP key available upon request.

_______________________________________________
vox-tech mailing list
vox-tech@lists.lugod.org
http://lists.lugod.org/mailman/listinfo/vox-tech



LinkedIn
LUGOD Group on LinkedIn
Sign up for LUGOD event announcements
Your email address:
facebook
LUGOD Group on Facebook
'Like' LUGOD on Facebook:

Hosting provided by:
Sunset Systems
Sunset Systems offers preconfigured Linux systems, remote system administration and custom software development.

LUGOD: Linux Users' Group of Davis
PO Box 2082, Davis, CA 95617
Contact Us

LUGOD is a 501(c)7 non-profit organization
based in Davis, California
and serving the Sacramento area.
"Linux" is a trademark of Linus Torvalds.

Sponsored in part by:
EDGE Tech Corp.
For donating some give-aways for our meetings.